Tesla Not Showing Map? (How To Fix)

I can understand how annoying and unpleasant it might be for you who depend on the map for directions and charging information. When you’re traveling, being unable to use the map could be inconvenient for you, especially if you depend on it to locate charging stations or chart out routes. 

In this article, I shall explain all the causes of Tesla not showing a map and also provide the best possible solutions for the issues.

Let’s get started…

How to Fix Tesla not showing map

I have observed many of the reasons due to Tesla not showing a map. There could be several reasons why a Tesla vehicle isn’t showing the map. 

The following are some typical causes of this problem with potential remedies for the issue I am going explain with possible solutions.

1. Problems with connectivity: 

A disruption in internet connectivity is one potential cause.  Internet connection is the basic need to operate a map on a Tesla. The map might not be seen if your Tesla is unable to make a connection or if the connection is poor. 

Solutions: 

  • You should make sure the car has a reliable Wi-Fi connection or a robust cellular data signal.
  • If you’re using Wi-Fi, try to rejoin the network or, if an alternative network is available, connect to it.
  • If you are utilizing cellular data, you should make sure that the mobile data settings in the automobile are turned on and set up correctly.

2. Software-Related Issues:

If your Tesla isn’t displaying a map, software issue is one of the main reasons why. Occasionally, software errors or flaws can result in a broken map display. 

These problems may be brought on by out-of-date software, conflicting program versions, or software update mistakes.

Solutions:

Following are the steps to update the software causing Tesla not to show the map:

In the settings menu of the automobile, look for any pending software updates.

If there is some update, then you should update the software of your Tesla.

You can update your Tesla’s software by following these steps

  • Make sure your Tesla has a stable internet connection.
  • In the main menu, go to software updates.
  • Tap on Check for software to see if any update is available. 
  • If any update is available tap in download and install.
  • Follow the on-screen instructions to finish the update.

Many software-related problems can be solved by updating the software.

You should restart the infotainment system. Following are the steps to restart the infotainment system:

  • To restart the system, press and hold the two steering-wheel scroll buttons at the same time.
  • You should keep the button pressed until the screen goes dark and the Tesla logo displays. 
  • This can assist in fixing small software bugs.

3. Display Settings: 

Your Tesla not showing the map. This can be due to a problem with the display settings. It’s conceivable that your Tesla car’s settings have been adjusted or turned off the map display setting.

Solutions:

You should check the settings or options menu in the car to see if the map display is turned on.

  • Make sure your car is parked and turned on. 
  • Go to the main menu from your screen.
  • Open the map app.
  • There you see an option like show map.
  • Tap on it to turn on your map display.

To test if it changes the presentation, you can also change other map-related parameters like the zoom level or map orientation.

Turn off the engine and give the infotainment system some time to idle. 

You should reset the display setting causing Tesla not to show the map by following the steps:

  • Make sure your Tesla is parked.
  • Open the main menu from the touchscreen.
  • Tap on display.
  • Scroll down and tap on reset settings.
  • Now conform to it.

You should reset the infotainment of your Tesla by following the steps:

  • You might try resetting the infotainment system if restarting the system doesn’t fix the problem. 
  • To accomplish this, select Safety & Security from the Controls menu,
  • Then you have to click on the option to Reset Factory Settings. 

Remember that doing this will clear all settings.

4. Hardware Failure:

In a small percentage of cases, a hardware failure or malfunction may be to blame for the Tesla map’s absence and causing a lot of inconvenience. This can be connected to the map display functionality of the car’s display screen, connectivity module, or other parts.

Solutions:

Firstly, you should identify the hardware component that is malfunctioning. Keep an eye out for any problem warnings, strange behavior, or physical damage indicators, especially on the GPS signal receiving antenna or module.

To check the hardware failure, you should follow the listed steps:

  • You should make sure that every cable, connector, and power supply is in place and working correctly.
  • If any cables are loose, secure them, and replace any that are broken, if necessary.
  • Check the GPS antenna and other parts. If you suspect that they are damaged, fix them or replace them with new ones.
  • You should make sure that the proper voltage is being supplied by the power sources.

5. Problems with the GPS signal: 

GPS signal errors can be one of the causes of Tesla not showing maps. A GPS signal is necessary for a Tesla’s map display to precisely pinpoint the location of the car. The map presentation may be impacted by poor GPS signals.

Solutions

  • You should make sure the car has a strong GPS signal. 
  • The signal strength indicator is often seen on the map display screen which will assist you to check the strength of signals.
  • If the GPS reception is poor or nonexistent, consider moving the car to an open area with a clear view of the sky.

Resetting the GPS settings may occasionally be able to solve problems. To reset the GPS follow the steps:

  • First, you should make sure your Tesla car is parked and in park mode by getting into the driver’s seat.
  • The Tesla touchscreen display can usually be seen by you in the dashboard’s middle.
  • You have to tap the “Controls” icon located at the bottom of the display. 
  • In the menu, scroll or swipe until you come across the “Safety & Security” area.
  • Then you have to look for the “Power Off” option under the “Safety & Security” heading. Touch it.  
  • You will be prompted for confirmation before the touchscreen is turned off. Click “OK” to continue.
  • Your Tesla car’s systems will turn off, and the touchscreen will go blank. To ensure a full reset, you have to wait for two minutes approximately.
  • To restart the vehicle and turn on the touchscreen, you have to apply the brake pedal after two minutes have passed.

6. Map Data Cache: 

To enhance performance, the map data on your Tesla vehicle is often cached. The map display may be affected if the cache gets corrupted.

Solutions

To deal with this follow the given steps:

You should clear the map data cache. Follow these steps to clear the cache data.

  • Go to the settings menu of the navigation app.
  • There you will see an option to Cache data. Tap on it.
  • Now click on clear cache data.  

You should delete any previously downloaded map data from the app setting menu, forcing the vehicle to download new data.

Before resuming the infotainment system, you should turn off the car and wait a few minutes. 

6. MCU power fuse issue:

If your Tesla is not showing a map then it can be due to an issue with the MCU fuse. MCU power fuse may be not correctly plugged in causing problems.

Solutions:

To solve the MCU power fuse issue, follow the given steps:

  • You should find the fuse box. It can be either in the frunk or under the rear seat according to your Tesla model.
  • Check out all the fuses, especially fuse number F51. 
  • Then you have to remove it. 
  • You have to check to see whether there is any damage present. 
  • Then you should replace the fuse if it does. 
  • Alternatively, you have to wait for five minutes before replacing the fuse.

You can also watch this video:

Final thoughts: 

All the causes that are creating problems in Tesla’s not showing maps are discussed thoroughly in this article. The causes include: 

  • problems with connectivity
  • software related issues
  • display settings
  •  hardware failure
  • GPS signals issue
  • map data cache
  • MCU power fuse issue

The solutions to all these causes are also explained in this article

If you have any queries regarding this article. You can feel free to ask.

How can I connect my Tesla to my phone’s GPS?

Therefore, for it to function, you must first download the mobile application from the Google Play Store before pairing your smartphone with the vehicle’s Bluetooth system. The Tesla must then be connected to the phone’s newly created mobile hotspot.

How can I reset the touch screen in my car?

First, give the power button a few seconds of long pressing. Open the menu tab next. Go here and choose “Factory Reset.” As soon as the factory reset is finished, wait until the car stereo turns on once more.

Tesla Model S Trunk Stuck

Where Are The Batteries In A Tesla?

Tesla Megaphone Not Working 

Why Tesla Tire Pressure So High?

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top