Tesla Model X Seat Stuck (10 Ways To Fix)

A jammed seat is one issue that some Tesla Model X owners have experienced. I know it would be very frustrating when you are not able to adjust your seats according to your performance or needs.

In this article, we’ll look at possible reasons why a Model X seat could become stuck with some potential fixes.

Let’s get started…

How To Fix Tesla model X seat stuck

A seat in a Tesla Model X may become stuck for several reasons. Here are a few possible explanations:

1. Power or Electrical Malfunction:

If your Tesla Model X seat is stuck, it can be due to power or electrical malfunctions. Tesla Model X seats have many electrical features that allow for adjustments like reclining, sliding, and folding. Your seats may become trapped in a specific position if there is a power system malfunction or electrical breakdown.

A faulty cable connection, a damaged control module, or an issue with the power supply could be the cause of your problem.

Several parts involved in your seat adjustment may be unable to communicate with one another due to wiring issues. This could lead to your Tesla Model X seat getting stuck. Wiring issues can be due to wear and tear, improper installation, or damage brought to your Tesla by external pressures.

Solutions:

You can take the following actions to remedy power or electrical issues:

  • You should check that you are using the seat controls correctly and for the purpose for which they were designed.
  • You must verify that you are using the appropriate touchscreens, switches, or buttons to make the needed seat changes.
  • You should check the fuse box of your Tesla Model X to see if any fuses for the power supply or seat controls are blown. You should replace any blown fuses with new ones of the same type if you locate any. (You should keep in mind the blown fuse is frequently medication for an underlying issue, so if the new fuse blows once again, it is advised to seek professional assistance to determine the cause.)
  • To ensure that the seat is receiving electricity, you should inspect the connections and wiring. In particular, you should search the area around the seat for any disconnected or loose cables. If you find loose or damaged wires, you should firmly reconnect them.

Power cycling your Tesla Model X in some circumstances can assist in freeing a stuck seat.

 To accomplish this:

  • You should park the car and turn off the engine.
  • Then you must wait a short while. 
  • You must then restart the engine before attempting to adjust the seat.

Any temporary electrical or software faults that can impair the movement of the seat can be resolved by power cycling.

2. Obstructions or Debris:

When there are obstructions or debris in the seat tracks or mechanisms, the seat of your Tesla Model X may become stuck. 

Over time, dirt, debris, or foreign objects may collect in your seat tracks or mechanisms, causing your seat to move less fluidly. If these obstacles prevent your seat from gliding or reclining properly, it could become stuck in position.

Solutions

You can attempt the following techniques to solve the problem if the seat in your Tesla Model X becomes stuck as a result of an obstruction or piece of debris.

You must look closely for any obvious impediments in the seat tracks, such as dirt, trash, or foreign items. To see the footprints clearly use a flashlight.

If you encounter any obstructions, be careful to get rid of them without damaging the track or the seat. You can use a vacuum with a narrow attachment or a soft brush to remove any loose dirt or debris from the seat tracks.

You can also remove any residue with a clean cloth or a little brush.

Maintaining smooth motion and avoiding upcoming obstacles are made possible by lubricating your seat tracks. You must use the appropriate lubricant Tesla suggests using, or refer to their official paperwork for advice on the best lubrication points and items. 

3. Mechanical Failure: 

Your Tesla Model X stuck seat occasionally results from a mechanical issue with the seat assembly itself. This can happen when worn-out or defective parts, such as cables, levers, or gears, prohibit your seat from moving properly.

Solutions:

In a Tesla Model X, fixing a mechanical problem that results in a stuck seat can be very difficult for you. However, if you want to do some simple troubleshooting, try the following procedures:

You have to try adjusting the seat in various settings using the controls on the seat. You might be able to remove any mechanical impediment and resume normal mobility by trying different seat adjustments.

You should search the seat mechanism for any broken or loose parts and look for any elements, such as levers, rods, or cables, that are obviously broken or disconnected. If you find anything you need you fix them. To do you you may need some professional support. 

Although you might be tempted to force a stuck seat out of its position, you must be careful. 

4. Resetting Seat Memory: 

If your Tesla Model X memory contains customized seat settings, consider resetting them. The seat may occasionally stay frozen due to a memory system bug. 

Solutions: 

You can use these steps to clear the seat memory on a Tesla Model X:

  • Before stepping into the driver’s seat, ensure sure the automobile is turned on.
  • You should check the door panel or the side of the seat for the seat controls. Usually found on these controls in the form of buttons or switches are the seat position, lumbar support, and occasionally seat heating or cooling settings.
  • You should check the seat controls for the “Save” or “Memory” buttons. An “M” or a numbered icon designating the memory preset slots is typically used to indicate it.
  • Until you see or hear a confirmation that the seat memory has been cleaned or reset, you have to press and hold the “Save” or “Memory” button. 
  • The precise process and length of the seat memory should be reset after the button is released, wiping off all previously saved settings.
  • You should set the seat to your preferred position, taking into account the seat position, recline angle, lumbar support, and other applicable settings.
  • Until you see or hear a confirmation that the new seat memory has been saved, you have to press and hold the “Save” or “Memory” button once more. 

If your Tesla Model X has numerous memory presets, repeat steps 1 and 2 for the other seat positions.

5. Adjust the seat wires and clips by tightening them:

The loose cables and clips can be a cause of your Tesla Model X seats being stuck. The rear (2nd or 3rd row) seat cables or clips that have become loose are frequently the blame for your seat becoming stuck. After years of use, the cables or clips can come undone as you move the seat forward or backward.

Solution:

  • You should simply locate the wires or clips under the seat (walk under the seat and it will be simpler for you to access) to fix the problem. 
  • After that, you should take out the carpet or liner and slightly force the one clip out. Adjust the seat wires and clips by tightening them.
  • After that, you should go further to find the clips and cables fastened to a piece of hard plastic behind the seat or trunk. 
  • Then you have to adjust the seat cables’ tension.
  • Additionally, you have to make sure the thick seat cable is in a secure location under the seat or trunk so it won’t be easily bumped or pulled. That will resolve the problem with the second-row seat folding on the Tesla Model X.

6. Update software:

Tesla often provides software updates to enhance the operation and performance of your vehicle. Your Tesla Model X seat getting stuck could be the result of a software flaw or fault.

By often checking for updates through the touchscreen of the car or the Tesla mobile app, you can be sure that your Model X is running the most recent software version. You can resolve the issue by installing the most recent software updates.

Solutions:

  1. Software updates for your Tesla Model X can frequently be made using Tesla’s over-the-air upgrade service. Bug fixes and enhancements for your vehicle system including the seat controls, are frequently included in these upgrades. You can try the following procedures if you think a software problem is what’s getting the seat stuck:
  • Before checking for available updates, you have to ensure that your Tesla Model X is connected to a stable Wi-Fi network or has a good cellular data connection. 
  • You should navigate to the software settings or updates section on the primary touchscreen of the car. 
  • Then you should verify if your car has any software upgrades available.
  • If a software update is available, you have to do it by following the touchscreen’s instructions. The update will immediately download and be installed on your Tesla Model X. The update procedure, which can take some time to finish, requires your car to be parked and linked to a power source.
  1. You should turn off and on again your Tesla Model X after the software update has been installed. This makes sure that the upgraded software is activated and applied completely.
  2. After the car has started again, you should check the seat controls to determine whether the problem has been fixed. To ensure the seat is moving appropriately and not becoming stuck, you should try adjusting the seat position, recline angle, and other settings.

7. Control Module or Switch Failure: 

In your Tesla Model X, a number of control modules are connected to the buttons or touch screens that control the seat adjustments. If the control module fails or the seat switch isn’t functioning properly, your Tesla Model X seat might not move properly or might get stuck in one place.

Solutions:

It is advised to take the following actions if you think your Tesla Model X seat is stuck due to a control module or switch failure:

  • You must begin by shutting off the engine, getting out, and locking all the doors. 
  • You must prior to getting back inside and restarting the engine, wait a short while. (Occasionally, a straightforward restart can assist in resolving momentary issues with the control module or switch).
  • You should make sure you are working the seat controls properly.
  • You should verify that you are using the appropriate touchscreens, switches, or buttons to make the needed seat changes.
  • If the seat controls are physical switches, you should look for any indications of wear, corrosion, or debris.
  • To eliminate any dirt or debris that might be impairing the switches’ performance, you should clean them with an appropriate electrical contact cleaner or compressed air.
  • If they are worn out, you may need to replace them with new ones.
  • You should check the fuse box in the car to see if any pertinent fuses for the seat controls or control module have blown. Replace any blown fuses with new ones of the same rating if you locate any. 

8. The seat motors failing:

The seats of your Tesla Model X have motors that regulate their movement. If a seat motor breaks or malfunctions, your seat could get trapped in that position. This may be brought on by internal mechanical defects in the motor assembly, motor degeneration, or electrical issues.

Solutions:

It is advised to take the following actions if you believe your Tesla Model X seat motor may be failing:

  • Firstly, you should make sure that the seat motor is truly malfunctioning. 
  • You should check to determine if the seat is completely unresponsive or just moves in one direction. If the seat is fully immobilized, a motor failure is most likely the culprit of your problem. If it goes in one direction but not the other, it can be a sign of a different problem, like a broken switch or bad wiring.
  • If it is moving but only in one direction or so, you have to inspect the seat motor’s wiring and connections. You may fix your motor by just taking your car to an electrician.
  • If the motor is totally not working, you may need to replace it with a new one. You can get your motor replaced from the nearest dealership or garage.

9. Sensor failure: 

Sensors in your Tesla cars track the position and movement of several components, including the seats. If your seat sensors have a malfunction or calibration issue, your seat may become stuck. 

For instance, the control system may prohibit further movement to guarantee safety if the sensor cannot accurately determine the position of your seat.

Solutions:

You can try the following techniques to solve the issue if the seats in your Tesla Model X are having sensor failure issues:

  • You must look for any trash, debris, or loose objects that might be obstructing the sensor’s functionality. 
  • Any obstructions must be carefully removed, being careful not to damage the sensors or the seat’s materials.
  • To clean the seat sensors, gently wipe them with a clean, soft cloth. (It is advised not to use abrasive or caustic chemicals as they could damage the sensors.)
  • Then you should verify the connections between the electrical system of the car and the seat sensors. 
  • You have to make sure there are no loose or broken wires and that the connectors are plugged in firmly.
  • You should carefully re-connect any slack connections you notice.
  • If you suspect that the sensors themselves are damaged, you may need to replace them with new ones.

10. Transform the black cylinder. 

If pressing the buttons on your front or back seats does not move them forward or backward, it’s probable that the movement of the black cylinder is to blame.

Solutions:

  • You should look beneath the right-side seat to find the black cylinder.
  • Once you’ve located the cylinder component, you should slide the tip back and forth while holding it. 
  • After that, you should press the button to verify your success.

Prevention Advice

You should take into account the following precautions to lessen the likelihood of your Tesla Model X experiencing a stuck seat issue:

  1. Regularly clean your car’s interior, paying special care to the motors and tracks that move the seats.  You can maintain a smooth seat operation by keeping these regions clear of debris.
  2. You should use caution when manipulating the seat controls and refrain from using excessive force to adjust the seats. The likelihood of mechanical failures can become lesser by using care when operating the seat components.

You can also watch these videos:

Conclusion:

So far we have discussed all the possible causes and their potential solutions for your problem.

The causes of the issue include:

  1. Power or electrical malfunctioning.
  2. Obstruction or debris issue
  3. Mechanical issue
  4. Software issue
  5. Resetting seat memory
  6. Control module or switch failure
  7. The seat motor failing
  8. Sensor failure.
  9. Transform the black cylinder
  10. Seat cables and slips should be tightened 

If you have queries regarding this article,  you can contact me. I will try my best to give you the proper assistance.

How is a Tesla seat dropped?

The back seats can also be folded completely forward by turning on the corresponding switch, which is located on the left side of the rear trunk. When the switch is pressed, the seat detaches. You can then push it down to lay it totally flat. Bring the chairs back to their upright posture by pulling upward until they lock into place.

In a Tesla Model X, can the back seats be folded down?

To maximize cargo space, the second-row bench seat backs can be entirely folded forward.

Tesla Not Showing Map?

Tesla Model S Trunk Stuck

Tesla Rear Defogger Not Working 

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top