Tesla Cruise Control Not Working (5 Ways To Fix)

Suppose you set out on your normal routine work in your Tesla on a lovely morning. You are eagerly looking forward to the smooth comfort of the Tesla’s famed Cruise Control feature.

As you engage the Cruise Control, you realize that your Tesla Cruise Control is not working. Isn’t it a frustrating situation for you? Of course, yes.

We also faced a similar situation and did deep research on the reasons and possible solutions for Tesla Cruise Control not working.

In this article, I am going to deeply explain to you all of the possible reasons for Tesla Cruise Control not working and their Possible solutions. So, let’s get started,

What is Tesla Cruise Control?

Your Tesla automobiles come with a Tesla Cruise Control feature, also known as “Traffic-Aware Cruise Control” (TACC), an innovative driver-aid technology.

It is a component of Tesla’s Autopilot system, which was created to improve your comfort and safety while driving on highways and long portions of roads.

Tesla Cruise Control uses intelligent sensor-based technologies in conjunction with conventional cruise control functions to maintain a certain speed and separation from other vehicles.

How To Use Tesla Cruise Control For Beginners 

Reasons and their possible Solutions for Tesla Cruise Control is not working

There are a lot of reasons for Tesla Cruise not working. These causes include faulty and calibrated sensors, faulty cameras, software glitches, environmental conditions, faults in breaks, and clutch switch

1. Faulty and uncalibrated Sensors

Sensors that are obstructed or incorrectly calibrated are one of the most frequent causes of your Tesla Cruise Control issues.

The ability of the sensors to effectively perceive their surroundings can be hampered by dirt, dust, or debris on them. The solutions for faulty and un-calibrated sensors are listed below.

Solutions

This can be due to faulty and uncalibrated sensors. You should consider the following solutions

1. Keep the sensors of your Tesla vehicle clear of any dirt, dust, or debris that could be blocking their vision or reducing their accuracy by routinely cleaning them.

2. Completely switch off your Tesla car, give it some time to cool, and then restart it. This simple step might fix any short-term issues impacting the sensors.

3. In certain driving situations, Tesla vehicles often calibrate their sensors automatically. You have to schedule a calibration check at a Tesla service center. However, if you believe the sensors are not calibrated properly.

Trained experts can carry out a thorough calibration procedure, to make sure the sensors are operating at their best.

2. Faulty Cameras

Your Tesla’s advanced driver assistance functions rely heavily on the camera, thus fixing camera-related faults as soon as possible is crucial to you for Cruise Control to work well.

Solutions

There are numerous solutions you can take to possibly fix the issue of your Tesla Cruise Control due to camera issues.

1. Over time, the camera lenses of your Tesla vehicle may gather grit, dust, or other material that compromises its ability to take clear pictures. You should keep the camera lens clean regularly to keep it clear.

To clean the camera lens, you should take the following steps

  • Camera lenses are located near the windshield, behind the rearview mirror.
  • You should take a soft lint cloth and an approved cleaning solution.
  • Wipe the camera lens very carefully to save them from damage.

2. The accuracy of camera-based systems, such as Cruise Control, may suffer if the camera calibration is off.

To check the camera calibration, follow these steps,

  • You should go to the “Main Menu” on the touchscreen display of your Tesla vehicle
  • Tap on the “Controls” options
  • There you will find the “Autopilot” option. Tap on it.
  • Now click on the “Service” option.
  • When you enter the Autopilot, there will be an option for “Camera”. Tap on it.
  • Now you have to tap on “Camera Calibration” to enable it.

After camera calibration, you have to restart your Tesla vehicle. For this, you have to follow the following steps,

  • Go to the “Main menu” on the touchscreen display of your Tesla vehicle
  • Tap on “Controls”
  • There will be an option for “Safety and Security”. Tap on it
  • Now tap on “Power off”.
  • Tap on “yes “to restart the vehicle.

3. Condensation from the cameras cannot be removed by cloth. The following steps will typically help you clear it more quickly:

  • Turn on the A/C and pre-cool the cabin with the temperature set to High.
  • Turn on the defroster for the front windscreen.
  • The door pillar cameras should be exposed to the air vents.

3. Software glitches

Your Tesla Cruise Control’s performance may be impacted by software errors or flaws, which may result in unexpected behavior or disengagement of the feature.

Solutions

There are following solutions to fix the software glitches that cause Tesla Cruise Control not to work.

1. You can frequently fix temporary software errors in your Tesla’s software by a simple restart, like with many electronic devices.

Completely shut off your Tesla car, then wait a few minutes before turning it back on. This can assist in system reloading and resolving any temporary software problems.

2. Ensure that the most recent software update is installed in your Tesla vehicle. Your Tesla often makes upgrades which include bug fixes to its software through over-the-air software updates.

To update the software in your Tesla vehicle, you should follow the following steps.

  • Ensure that your Tesla vehicle is connected to a stable network connection.
  • On the touchscreen display of your Tesla vehicle, go to the “Main Menu”.
  • There you will see an option for “Software”. Tap on it.
  • When you enter the software option, you will see any “Software update” if available.
  • If there is any pending Software update, you should click on the “Download and Install button”.

When the procedure for software update is complete, you should restart your Tesla vehicle.

A soft reset can also fix this problem by removing the glitches and bugs from your Tesla software.

You can soft reset your Tesla by,

  • Make sure the car is parked.
  • Press and hold the buttons on the steering wheel.
  • Hold them until the Tesla logo appears.
  • Wait for your Tesla to reset.

4. Environmental Conditions

Certain environmental conditions such as intense rain, snow, fog, or intense sunlight, can make it difficult for the sensors to effectively sense their surroundings.

Solutions

It is advised to you to avoid Cruise Control entirely in conditions when the environmental conditions are not favorable.

You may respond swiftly to potential threats and shifting road conditions by operating the vehicle manually. You should pay attention to the following points

1. On the touchscreen display of your Tesla automobiles, notices or cautions are frequently displayed if various features are affected by environmental factors.

You should pay close attention to any alarms and follow the given instructions.

2. You must assume full control of the vehicle manually if you come into unfavorable weather circumstances that impair the performance of Cruise Control or other driver assistance functions.

You should drive your Tesla safely and at a speed appropriate to the area and the surrounding weather.

3. Make sure your windscreen is spotless and free of anything that can impair vision. For safe driving in bad weather, visibility is essential.

5. Fault in Brake and Clutch Switch

When you apply the clutch or brakes, cruise control is intended to deactivate. The cruise control may not work if there is an issue with the clutch or brake switch.

If you notice that the cruise control disengages as soon as you start it, there may be a problem with the clutch or brake switch. There are the following solutions for this problem

Solutions

1. You should ensure that there are no actual obstacles close to the clutch and brakes that might be interfering with the switches’ ability to function.

You should remove the foreign items or debris that may occasionally prevent them from operating properly.

2. You should make sure that the switches are positioned and aligned properly. The Cruise Control may not function properly due to misalignment of brakes or clutch switches.

Final Thoughts

Tesla’s Cruise Control, a key component of the Autopilot system, illustrates the idea of a safer and more effective driving experience.

However, due to certain reasons, the Tesla Cruise Control fails to perform properly which causes problems for you.

In this article, we have discussed with you all of the possible reasons for Tesla Cruise Control not working and also their possible solutions in detail. The solutions are

  1. Make sure your camera and sensors are clean
  2. Recalibrate the sensors and camera.
  3. Restart your Tesla vehicle by powering it off.
  4. Update your Tesla software.
  5. Perform a soft reset.
  6. Check your environmental conditions.
  7. Ensure that your brake and clutch paddle properly functioning.
  8. Connect Tesla customer service.

Hopefully, this article will cover all the things you need to know. If you have any information regarding Tesla Cruise Control not working and you want to share, then you can reach out to us via the contact us page.

Does Tesla Cruise Control turn off automatically?

No, Tesla Cruise Control does not turn off automatically. It will turn off when you apply the brakes.

Could Tesla vehicle speed be the reason for Tesla Cruise Control not working?

No, Tesla vehicle speed does not affect the performance of the Tesla Cruise Control because it is designed to work on multiple speed ranges.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top