Issues With Lectron Tesla to j1772 Adapter (Easy Fixes)

As compared to other EV vehicle manufacturers, Tesla has the most number of charging stations across the country. And when it comes to buying an EV, everyone goes for a Tesla. 

Almost every EV user has a Tesla in his house. And if one buys another EV, instead of buying another charger, you can charge your Tesla using a Tesla to j1772 adopter.

But what happens if your adapter doesn’t work or suddenly starts causing problems? you don’t have to panic. Here, in this article, I will explain all the issues and their solutions in detail.

Let’s Get Started…!!!

How to fix Lectron Tesla to j1772 Adapter issues?

To tackle the issues with your Lectron Tesla to j1772 adapter first, it’s essential to begin with the adapter functionality and compatibility, examine any physical damage, and check the connections. Additionally, perform a software update to solve the issues.

For more explanation continue reading…

1. Low power delivery

The most frequent reason causing your Lectron Tesla to j1772 adapter not to charge your EV is its low power delivery.

The cause of low power delivery to your EV could be that your adopter is of low amperes. Your j1772 adopter should be of at least 40amps to provide enough power delivery to charge your car using an EV using a Tesla charger.

Solution

To fix this problem you have to make sure that your adopter is of 40amps at least. If you have bought an adopter of 38amps or lower, you need to return it and buy a new one of at least 40amps.

2. Start your EV

There is some sort of trick that can be used to start the charging using the j1772 adaptor using a Tesla charger. 

To make your EV start charging, you just need to ignite your EV when you have got a warning of “Charging Failed” from your EV.

This will start charging and when you turn your EV off, it will keep charging.

3. Accumulation of dust or debris

You may face issues with the adapter connection being sporadic or inconsistent. As a result, your Tesla charging may be interrupted or proceed more slowly.

Solution

You should also check your j1772 adaptor for any accumulation of dirt or debris and your EV’s charging port. If you find any, you should clean it with a soft and dry cloth and a gentle brush.

It is best to use a vacuum cleaner to remove the dust and debris. Additionally, you should also check and clean the Tesla charger. 

4. Overheating

Overheating is another reason that can cause your j1772 adaptor not to charge your EV. 

If you are using your 40amps  j1772 adaptor for a long time, it can be overheated and can cause your adapter to stop charging your EV.

Solution

The best solution to fix this overheating is to get yourself an adopter greater than 40amps. we recommend you to get an adapter of at least 60amps. So that it won’t be overheated and can continuously charge your EV.

5. Loose  connection

If your EV is not being charged use a j1772 adaptor with a Tesla wall charger. It is quite possible that there is a loose connection.

It is possible that the j1772 adaptor has not been properly attached to the Tesla charger or the j1772 adaptor has not been attached to your EV.

Solution

You should ensure that your j1772 adaptor is properly connected to the Tesla charger and your EV. You should try a little bit of force to connect the adaptor properly.

6. Wear and Tear or water damage

If your j1772 adaptor has fallen recently or it has been through any kind of accident, it is possible it has been damaged and has stopped working. 

Or if it has been exposed to rain or water, it will also stop working. Because it does not have any waterproof seal to stop water from getting in.

Solution

If you suspect any kind of wear and tear or water drops over or inside your j1772 adaptor, you may need to get yourself a new Lectron j1772 adaptor.

How to avoid this problem in the future?

You can follow the below stated tips to use your Lectron j1772 adapter to keep i safe and healthy;

1. Always try to purchase a good quality adapter of higher amps.
2. Use an adaptor of a higher amp to avoid overheating.
3. Use your adaptor carefully and avoid getting it damaged.
4. Never let your adaptor outside for being exposed to dust or rain.
5. You must check the adapter regularly.

Final Thoughts

Up to this point, I have explored all the points that causing issues in your Lectron Tesla to J1772 adapter. I have also provided some potential troubleshooting methods. Some of these troubleshooting methods may entail: 

1. Use an adaptor of at least 40amps for proper delivery of power to charge your vehicle.
2. Ignite your EV after receiving the “Charging Failed” warning.
3. Check your adaptor for dust or debris accumulation and clean it.
4. Use an adaptor of at least 60amps to avoid overheating.
5. Properly connect the adaptor with the Tesla charger and your EV.
6. Get a new adaptor if you inspect any wear and tear or water damage.

I have thoroughly explained all these points and tried to figure out the causes. If you have any inquiry relevant to this problem you can contact us. We will try to respond to your inquiries. 

I hope that you find it practically useful for yourself. We would be happy to get your response.

What is the Lectron Tesla to J1772 adapter?

The Lectron Tesla Wall Charger to J1772 Adapter was specifically created to link Tesla chargers with EVs that support J1772.

How much time does my Tesla vehicle require to charge with a Lectron J1772 adapter?

Your Tesla vehicle may require almost 20 to 25 miles of range per hour to get fully charged by using a Lectron J1772 adapter with Level 2 charging stations.

Can I use the Lectron J1772 adapter with Tesla Superchargers?

No, you cannot use the Lectron J1772 adapter with your Tesla Superchargers.

Tesla Urban Charger vs. Supercharger

Tesla Home Charger Vs Supercharger

Tesla iPhone Wireless Charger Not Working